Understanding Mold Stain Removal
Understanding Mold Stain Removal | 2017-09-07 | Restoration & Remediation Magazine
There has been a significant increase in new mold stain remover products in the restoration/remediation market lately. Part of the reason for that is an increasing awareness of liquid-based mold removal methods and a growing understanding of the relationship between mold staining and property value perceptions. Many of the new mold stain remover products are just re-marketed old chemistry, some are improvements of older formulations, and a few are unique new technologies. So what’s the big deal about removing mold stains? How does one determine which product type to use?
It is important to always remember that removing or improving the appearance of mold staining is NOT mold remediation. Real mold remediation must always result in the physical removal of mold contaminants. That being said, mold stain removal is an important part of mitigating the damage caused by mold growth for two primary reasons:
1. Visible mold staining can reduce the value of a property.
2. Visible mold staining can cause negative impressions and apprehension about mold remediation results.
Until recently the only widely known way to remove mold staining was to remove a layer of the surface of wood materials via sanding or media blasting… or by covering the stained surface with an opaque coating. New chemical technologies now make it possible in most cases to remove or improve the mold staining without damaging or covering up the structural materials. So which mold stain remover product should you choose?
First, it’s useful to understand what “mold staining” really is. Without getting too technical, it is the visible result of fungal metabolic processes. In other words, it is visible staining on surfaces due to mold digestion and all the related chemical things that go on when mold does its thing. When you consider that there are thousands of types of mold species, digesting hundreds of different potential food sources in hundreds of types of environmental conditions on hundreds of different types of surfaces… you might get the idea that no two mold staining situations are alike.
Because of the nature of mold staining, it is difficult to predict the results of mold stain removal. For example, there are cases where the mold has been digesting the surface of the wood in an attic for many years. In those cases, there may be no way to make the surfaces look new again without removing a significant layer of the surface. There are also situations where the mold has trapped soot or some type of inorganic pollutants that cause stains that do not react with the particular type of chemistry in the product you are using.
With that in mind, the difficulty of removing mold stains falls on a spectrum of difficulty ranging in mold stains that can be just wiped off to those that are impossible to remove...
Article by Jeff Heyd, in Restoration & Remediation - September 19,2017
Call SERVPRO of Sunrise for Mold Remediation at 954-748-7887
Insured, trained and certified.